Symptom:
(public)		 To add additional internal disk drives to your server follow the steps below:

A- Power down your EZblue server.

B- Open the server case.

C- Add the new disk drive. Make sure both the power and the data cables are
connected. Any SATA, IDE or SCSI drive will work. Use new drives do not gamble
with old drives. Generally, the disk drive is the first thing that goes
bad. When done close the server case.

D- Power up the server. From a PC on your network connect to the server and
log on to the server dashboard.

E- Click on the "Server Tools" button. Select the "Disk Management".
You should see the new drive in the list. Select the drive to enable it and
click next.

F- Now you have the option of making the new drive either a data drive or
a backup drive.

G- Select yes if you want the server to format the drive. Click next. If
you added a large disk drive it may take few minutes to format the drive.

H- Click refresh button to check the status of the new disk drive. Once it
is ready it will show up in the drives list as assigned.

Now you can use the drive to store more data or to backup the server.
Problem:
(public)
Solution:
(public)